Cross Graphite Casting Ingot Mold Graphite Crucible Mold Melting Gold Silver Nonferrous Metal

Tvoip Cross Graphite Casting Ingot Mold Graphite Crucible Mold Melting Gold Silver Nonferrous Metal Casting Refining Scrap Jewelry Dimensions: 3.9' 5.9' 1.1' Material:Graphite Brand:Tvoip Premium Material: Main material is graphite, the ash content is less than 0.1 percent, ensuring that the metal purity will not be affected during metal refining; Rapid cold and hot use conditions, with nice thermal stability Ingot Mold Size: the outside dimension of cross graphite casting mold is about L 3.46 x W 1.85 x H 0.3inch/88 x 47 x 8 mm, inner dimension: 63 x 38 x 4 mm (2.48 x 1.5 x 0.16 inch), suitable for melting and casting metals such as gold, silver, brass, aluminum, copper, zinc, plumbum, etc. Unique Design: It has nice thermal conductivity, which can greatly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance Wide Application: The mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on; It can also be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mould and other purposes; Considering the size of this product, it is more suitable for small-capacity metal melting. Excellent Performance: The ingot mold has excellent thermal stability and can be heated and cooled quickly. Good thermal conductivity can greatly shorten the melting time and save energy. This graphite ingot set will meet your daily needs.